Toyota JZX90 & JZX100 Rear Traction Arms #R33X-CBLE

Toyota JZX90 & JZX100 Rear Traction Arms #R33X-CBLEThe GKTech Toyota JZX Rear Traction Arms allow adjustment of the rear multi link suspension. They can be adjusted to eliminate bump steer and alter other rear suspension traction settings to improve suspension response. The lengths on these arms are fully adjustable and with the right adjustments, you can change the position and pitch of which the suspension rotates on, along with the amount of "anti squat" of the rear. CAD designed and FEA tested

Note 3: Available without brake pads for those looking to BYO

A common issue when using a spacer like this is that the center bolts can either leak or crack the OEM manifold

In addition to reducing the anti-squat value

- Adds a minimum of 39mm extension to the steering shaft

is another reason we’ve included the GKTECH ABS Delete Manifold Block in this kit

G8X M3/M4The GKTECH adjustable camber shims replace the OEM eccentric bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set

Fixed adjustment allows for +/- 4

- Direct replacement of the standard hard lines

- Fully serviceable rear hubs

In most cases the shorter LCA's will be sufficient and the longer LCA's will in most cases only be able to be used when running wider front guards

engineered to eliminate the slop and movement of factory rubber mounts

1kg and S14/S15 is 3