180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (26.0 mm OD, 101.6 mm CLR) Dimple Die Minimum Inside Radius: Approximately 40”

Minimum Inside Radius: Approximately 40” (1016 mm)

Angled Notches: 0-180 degrees

SE provides those extra tools that you will need when you are concerned about setup and production times

100% Designed

Outside Diameter of the Tubing (OD): 42

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (26.0 mm OD, 101.6 mm CLR) Dimple Die Minimum Inside Radius: Approximately 40”Specs Outside Diameter of the Tubing (OD): 26. 0 mm Minimum Wall Thickness (DOM): 0. 065" (1. 7 mm) Minimum Wall Thickness (4130): 0. 065" (1. 7 mm) Minimum Wall Thickness (ERW): 0. 083" (2. 1 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4" (101. 6 mm) Maximum Degree of